Ignition coil resistance 3.8 ohms

Looking for some mechanical advice or sharing your own tales of the workshop wonder.

Moderator: VF1000R

3 posts Page 1 of 1
bille7
Member
Posts: 22
Joined: Sat Mar 03, 2018 3:10 pm


So am restoring this bike and resistance between the primaries on each coil tested at around 3.8 ohms. Kinda high but is it high enough to replace them? Has anyone bolted in a set of aftermarket coils? If so- which ones and did you fab a bracket
to bolt them in the same place? This is an '86 VF1000R.

thanks,
bill
RC30FREAK
Member
Posts: 112
Joined: Thu May 17, 2012 12:13 am


Hey Bill , I fall a bit short when it comes to electrical problems . My suggestion is to go on the Facebook Forum : Honda VF1000Rs-Standard , Modified and Look-a-likes and ask your question there . If you need any parts at all for your bike or spares please don't hesitate to PM me . Cheers .
- Ron
bille7
Member
Posts: 22
Joined: Sat Mar 03, 2018 3:10 pm


thanks, Ron-

Unfortunately, I've ditched my FB account long ago. PMs on FB aren't all P (8
3 posts Page 1 of 1

Who is online

Users browsing this forum: No registered users and 1 guest